R7 Laser Receiver

The R7 Electronic Laser Receiver combines an affordable price with the features of high end, high cost laser receivers. It works with all Pro Shot laser transmitters, and most other brands of rotating lasers on the market. Grade information is conveyed via a LCD front panel display, a LED display on its backside, and audio tones. The visual display now provides 5 channels of information, high, high fine, on grade, low fine, and low. The user can select between three operating accuracies, ultra-fine (±1/64 inch), standard (±1/16 inch), and coarse (±1/8 inch). The R7 provides between 500 and 1000 feet (152m to 305m) of working range depending upon which Pro Shot transmitter it is paired with. The receiver runs for approximately 60 hours on a 9V alkaline battery. 3 year Guardian Warranty.

R7 Receiver with clamp: $225.00 US List

  R5E Laser Receiver

The R5E is our basic low cost laser receiver that pairs with the L5 and L3 laser transmitters. It has a front side visual display and audio tones for high, low, and on grade. The R5e runs on 1 9V alkaline battery. The R5e carries a 1 year warranty against defects in workmanship and materials. 

R5e Receiver with clamp:  $150.00 US List

  R8 Laser Receiver

This is our top of the line laser receiver. It features a 5 channel LCD display on the front and back of the housing. There are 3 selectable on grade accuracies, ±1/16", ±1/8", and ±1/32". The housing is sealed against dust and water. The R8 runs for more than 70 hours on 2 AA alkaline batteries. It is protected by a 2 year warranty. The optional remote display allows viewing of grade information from up to 8 feet from the receiver. 

R8 receiver with clamp:   $295.00

R8 Remote Display Option: $150.00

  Laser Rod, 10' Direct Reading

We think this two piece 10' direct reading laser rod is the best thing since sliced bread. The sliding tape is marked in feet, tenths, and hundredths and also gives cut and fill measurements. Simply set the rod on a hub with a known elevation, move the receiver until it gives an on grade reading, then move the tape until the known elevation is aligned with the pointer on the receiver clamp. The tape can then be locked so it is stationary with respect to the lower portion of the grade rod. To take further readings, slide the receiver or the upper rod portion until the one grade signal is given, then read the elevation off the tape. There is no need to add or subtract numbers to get your elevation. The receiver bracket fits Pro Shot R7, and R8 receivers.

Laser Rod, 10' Direct Reading:    $185.00 US List

Receiver Bracket for Laser Rod:    $65.00 US List

   W1 Wall & Vertical Mount

The W1 is designed to clip to the wall angle on drop ceiling jobs, or is used to lay the lasers down into the vertical mode. In vertical mode, the W1 can be set on the floor, or threaded onto a tripod. (The L2, L2+, L4, L4+, and L1-S lasers can all be used in the vertical mode.)

W1 Wall & Vertical Mount Price: $75.00 US List

   S1 Compound Slope Adapter

The S1 Slope Adapter allows the model L1-S and L1-AS lasers to shoot dual slope situations. A chart tells the user what slope to dial into the laser, and the S1 adapter allows the user to precisely rotate the laser so that the x and y axis end up at the desired slopes.

S1 Compound Slope Adapter Price: $50.00 US List

  Rechargeable Battery Kit

500-0250M NiMH Rechargeable Battery Kit (US) for L4, L4+, L1-AS,  MC-1 Price: $60.00 US List

080-0050M NiMH Rechargeable Battery Kit (US) for L5 & L3: $52.00 US List

Contact Laser Reference for information on chargers for use outside of the US List

  MT1 Magnetic Ceiling Target

The MT1 target magnetically attaches to drop ceiling grids, and can be used with any visible beam rotating laser.

MT1 Magnetic Ceiling Target Price: $12.00 US List

  T2 Aluminum Telescopic Tripod

The T2 is an aluminum telescopic leg tripod with a 5/8 x 11 thread. It adjusts from about 3 1/2 feet to 5 1/2 feet in height. The telescopic leg segments are held by quick release levers.

T2 Tripod Price: $85.00 US List

   P1 Plumb Plate

The P1 Plumb Plate enables one to position the L4+ laser over a point on the floor, so that its plumb beam can transfer that point above to the ceiling.

P1 Plumb Plate Price: $10.00 US List